ORICO M.2 NVMe SSD J-20 PRO With Heatsink Kit

Note: This is SSD with Heatsink Kit. Included one SSD and one Heatsink.

SSD Specifications

Product Name: M.2 NVMe Gen4x4 Solid State Drive
Interface Type: M.2 M key
Read Speed: 7000MB/S
Flash Type: 3D NAND Flash
Size: 2280
Storage Ambient Temperature: -40°C-85°C
Working Environment Temperature: -0°C-70°C

SSD Description

1. Ultra-fast: 7000MB/s reading and 6500MB/s writing, transfer data and play games swiftly and dependably.
2. Rapid Heat Dissipation: Heatsink fin and thermal silicone pad included, no worry about overheat damage.
3. Multiple Large Capacity for Selection: More available space meets different needs.
4. Safe and Stable: Rigorous tests esure data security and pleasant using experience.

Heatsink Description

>>Compatibility support 22 × 80 size single/double sided M.2-NVME/NGFF solid state drive.
>>Heat dissipation area extend, passive heat dissipation performance.
>>Pure copper heat pipe, double to provide better heat dissipation performance.

M2HS7

Heat dissipation aluminum +pure copper heat pipe makes the heat dissipation effect better.

M2HS8

The super combination of aluminum +pure copper heat pipe+aluminum fin allows excellent heat transfer.

M2HS8-FAN

Heat dissipation aluminum +pure copper heat pipe+aluminum fin+fan, super combination to achieve the ultimate SSD cooling performance.
Silent fan for maximum cooling performance.
Fan:
The performance of the fan will vary with the circuit used; Cooling fans are generally divided into the following three categories (active air heat dissipation/air flow cooling)
1. Axial flow type: the outlet direction of air flow is the same as the axis direction;
2. Centrifugal type: use centrifugal force to throw the air flow outward along the blade;
3. Mixed flow type: it has the above two air flow modes.

Tips

Brass:

It is an alloy of copper and zinc (about 60% copper, about 40% zinc); The intensity is high, and the heat dissipation effect is related to the area (belongs to passive area heat dissipation).

Thermal conductivity: brass 92.1W/mk, pure copper 376.8W/mk

Aluminium :

It is a good conductor of heat, and its thermal conductivity is 3 times greater than that of iron; Its surface is not susceptible to corrosion (passive conduction/area heat dissipation) due to its dense oxide protective film.

Thermal conductivity: aluminum alloy 121-151W/mk, pure aluminum 217.7W/mk

Heat pipe:

heat pipe (pure copper) is a heat transfer element with high thermal conductivity. It transfers heat through the evaporation and condensation of working fluid in the fully closed vacuum tube shell. It has a series of advantages, such as high thermal conductivity, good isotherm, arbitrary change of heat transfer area on both sides of the cold and hot sides, remote heat transfer, temperature control, and so on.